Industrial cable
Industrial wire harness and cable assembly
Harnesses for conveyors, automated storage, AGVs, packaging machines and building automation, built in high mix and low volume to each project’s drawing.
Wire range
Automated processing from AWG 36 to AWG 2
Conductors from 0.013 mm² (AWG 36) to 33.6 mm² (AWG 2), with nominal metric sizes from 0.02 mm² to 35 mm².
Power and encoder
Circular connector cable assemblies
Cable assemblies for servo power and encoder applications, where high current and high-speed data run at the same time. For the machinery industry we also build:
- High-flex cable for moving applications
- Harnesses for extreme temperatures
- Robust cable for harsh environments
- Compact harnesses for limited space
Sensor and actuator
M8 / M12 sensor and actuator cables
- Reliable signal transmission, with 360° shielding where there is electromagnetic interference
- Safe use in the field thanks to a high degree of protection
- Ferrule-crimped and connector-terminated ends
Interconnect
Board-to-board, wire-to-board and cable-to-cable
High-density and high-speed connectors for industrial, consumer and automotive applications.
- Cable to cable
- Board to board
- Board to cable
- Panel mount
Signal
Twisted wire for differential signalling
Pairs twisted to a controlled lay length for differential signals and noise rejection.
Power
Grounding cables up to 35 mm²
Grounding and braided earth leads on heavy wire gauges, crimped on automated equipment up to 35 mm².
Cable processing
Multicore, coaxial and triaxial processing
Rotating-blade stripping and slitting gives clean, repeatable jacket and shield cuts on multi-layer, coaxial and triaxial cable.
At the other end of the range, fine wire down to AWG 36 is cut, stripped and crimped automatically.
Wire preparation
Tinning and intermediate stripping
Hook-up wire tinning, window (intermediate) stripping and ferrule crimping for terminal blocks and solder joints.
Data
D-sub data cables
D-sub cables for data communication, on shielded cable, with soldered or crimped terminations.
Network
RJ45 patch cords
Standard patch cords and robust cords for harsh environments, including a special L-shaped angled cover for installations with limited space.
Product range
From IDC ribbon to power leads
Multi-core assemblies 
Cat6 patch cords 
IDC ribbon cables 
Barrel crimp & ferrule 
Ring & ground leads 
D-sub data cables 
Fan & blower cables 
Power leads 
Motor & encoder leads 
Wire-to-board
Automation
Automation for consistent crimps
Wire cutting, stripping and terminal crimping run on fully automatic machines, so every crimp is made to the same programmed settings and checked as it is made.
Multi-layer and shielded cable is prepared on rotating-blade stripping machines for clean, repeatable cuts, and a library of more than 200 crimp applicators is maintained in-house to match each terminal family.
- Output
- Over 300,000 crimps per day
- Wire range
- AWG 36 to AWG 2
- Applicators
- 200+ in-house
Components
Genuine connectors and cable
Request a quotation
Send us your drawings
Email your harness drawing, BOM and annual volume. We return a preliminary proposal within 4–5 working days.